Thursday, August 29, 2019
Cost Accounting Chapter 11
Horngren, C. T. , Datar, S. M. and Foster, G. (2003) Cost Accounting ââ¬â A Managerial Emphasis, Pearson Education, Inc. , New Jersey, Eleventh Edition CHAPTER 11 DECISION MAKING AND RELEVANT INFORMATION 11-1 The five steps in the decision process outlined in Exhibit 11-1 of the text are: 1. 2. 3. 4. 5. Obtain information Make predictions about future costs Choose an alternative Implement the decision Evaluate performance to provide feedback 11-2 Relevant costs are expected future costs that differ among the alternative courses of action being considered.Historical costs are irrelevant because they are past costs and, therefore, cannot differ among alternative future courses of action. 11-3 No. Relevant costs are defined as those expected future costs that differ among alternative courses of action being considered. Thus, future costs that do not differ among the alternatives are irrelevant to deciding which alternative to choose. 11-4 Quantitative factors are outcomes that are m easured in numerical terms. Some quantitative factors are financialââ¬âââ¬âthat is, they can be easily expressed in monetary terms. Direct materials is an example of a quantitative financial factor.Qualitative factors are outcomes that are difficult to measure accurately in numerical terms. An example is employee morale. 11-5 Two potential problems that should be avoided in relevant cost analysis are: 1. 2. Do not assume all variable costs are relevant and all fixed costs are irrelevant. Do not use unit-cost data directly. It can mislead decision makers because a. it may include irrelevant costs, and b. comparisons of unit costs computed at different output levels lead to erroneous conclusions 11-6 No. Some variable costs may not differ among the alternatives under consideration and, hence, will be irrelevant.Some fixed costs may differ among the alternatives and, hence, will be relevant. 11-7 No. Some of the total unit costs to manufacture a product may be fixed costs, and, hence, will not differ between the make and buy alternatives. These fixed costs are irrelevant to the make-or-buy decision. The key comparison is between purchase costs and the costs that will be saved if the company purchases the component parts from outside plus the additional benefits of using the resources freed up in the next best alternative use (opportunity cost). 1-8 Opportunity cost is the contribution to income that is forgone (rejected) by not using a limited resource in its next-best alternative use. 11-1 11-9 No. When deciding on the quantity of inventory to buy, managers must consider both the purchase cost per unit and the opportunity cost of funds invested in the inventory. For example, the purchase cost per unit may be low when the quantity of inventory purchased is large, but the benefit of the lower cost may be more than offset by the high opportunity cost of the funds invested in acquiring and holding inventory. 1-10 No. Managers should aim to get the highest co ntribution margin per unit of the constraining (that is, scarce, limiting, or critical) factor. The constraining factor is what restricts or limits the production or sale of a given product (for example, availability of machine-hours). 11-11 No. For example, if the revenues that will be lost exceed the costs that will be saved, the branch or business segment should not be shut down. Shutting down will only increase the loss. Allocated costs are always irrelevant to the shutting down decision. 1-12 Cost written off as depreciation is irrelevant when it pertains to a past cost. But the purchase cost of new equipment to be acquired in the future that will then be written off as depreciation is often relevant. 11-13 No. Managers tend to favor the alternative that makes their performance look best so they focus on the measures used in the performance-evaluation model. If the performanceevaluation model does not emphasize maximizing operating income or minimizing costs, managers will most likely not choose the alternative that maximizes operating income or minimizes costs. 1-14 The three steps in solving a linear programming problem are: 1. 2. 3. Determine the objective function. Specify the constraints. Compute the optimal solution. 11-15 The text outlines two methods of determining the optimal solution to an LP problem: 1. Trial-and-error solution approach 2. Graphical solution approach Most LP applications in practice use standard software packages that rely on the simplex method to compute the optimal solution. 11-2 11-16 (20 min. ) Disposal of assets. 1. This is an unfortunate situation, yet the $80,000 costs are irrelevant regarding the decision to remachine or scrap.The only relevant factors are the future revenues and future costs. By ignoring the accumulated costs and deciding on the basis of expected future costs, operating income will be maximized (or losses minimized). The difference in favor of remachining is $3,000: (a) Remachine Future revenues Deduct future costs Operating income Difference in favor of remachining $35,000 30,000 $ 5,000 $3,000 (b) Scrap $2,000 ââ¬â $2,000 2. This, too, is an unfortunate situation. But the $100,000 original cost is irrelevant to this decision.The difference in relevant costs in favor of rebuilding is $7,000 as follows: (a) Replace New truck Deduct current disposal price of existing truck Rebuild existing truck $102,000 10,000 ââ¬â $ 92,000 $7,000 (b) Rebuild ââ¬â ââ¬â $85,000 $85,000 Difference in favor of rebuilding Note, here, that the current disposal price of $10,000 is relevant, but the original cost (or book value, if the truck were not brand new) is irrelevant. 11-3 11-17 (10 min. ) The careening personal computer. Considered alone, book value is irrelevant as a measure of loss when equipment is destroyed.The measure of the loss is replacement cost or some computation of the present value of future services lost because of equipment loss or damage. In the specific case des cribed, the following observations may be apt: 1. A fully depreciated item probably is relatively old. Chances are that the loss from this equipment is less than the loss for a partially depreciated item because the replacement cost of an old item would be far less than that for a nearly new item. 2. The loss of an old item, assuming replacement is necessary, automatically accelerates the timing of replacement.Thus, if the old item were to be junked and replaced tomorrow, no economic loss would be evident. However, if the old item were supposed to last five more years, replacement is accelerated five years. The best practical measure of such a loss probably would be the cost of comparable used equipment that had five years of remaining useful life. The fact that the computer was fully depreciated also means the accounting reports will not be affected by the accident. If accounting reports are used to evaluate the office manager's performance, the manager will prefer any accidents to be on fully depreciated units. 11-18 (15 min. Multiple choice. 1. (b) Special order price per unit Variable manufacturing cost per unit Contribution margin per unit Effect on operating income = $1. 50 ? 20,000 units = $30,000 increase $1,200,000 $48 9 $57 1,140,000 60,000 25,000 $ 85,000 $6. 00 4. 50 $1. 50 2. (b) Costs of purchases, 20,000 units ? $60 Total relevant costs of making: Variable manufacturing costs, $64 ââ¬â $16 Fixed costs eliminated Costs saved by not making Multiply by 20,000 units, so total costs saved are $57 ? 20,000 Extra costs of purchasing outside Minimum overall savings for Reno Necessary relevant costs that would have to be saved in manufacturing Part No. 75 11-4 11-19 (30 min. ) Special order, activity-based costing (CMA, adapted). 1. Award Plus's operating income under the alternatives of accepting/rejecting the special order are: Without OneWith OneTime Only Time Only Special Order Special Order 7,500 Units 10,000 Units Revenues Variable costs: Direc t materials Direct manufacturing labor Batch manufacturing costs Fixed costs: Fixed manufacturing costs Fixed marketing costs Total costs Operating income 1 2 Difference 2,500 Units $250,000 87,500 100,000 12,500 ââ¬âââ¬â ââ¬âââ¬â 200,000 $ 50,000 $1,125,000 262,500 300,000 75,000 1,375,000 350,000 2 400,000 3 87,500 1 275,000 275,000 175,000 175,000 1,087,500 1,287,500 $ 37,500 $ 87,500 $300,000 ? 10,000 7,500 3 $262,500 ? 10,000 7,500 $75,000 + (25 ? $500) Alternatively, we could calculate the incremental revenue and the incremental costs of the additional 2,500 units as follows: Incremental revenue $100 ? 2,500 Incremental direct manufacturing costs Incremental direct manufacturing costs Incremental batch manufacturing costs Total incremental costs Total incremental operating income from accepting the special order $262,500 ? 2,500 7,500 300,000 ? ,500 7,500 $500 ? 25 $250,000 87,500 100,000 12,500 200,000 $ 50,000 Award Plus should accept the one-time-only specia l order if it has no long-term implications because accepting the order increases Award Plus's operating income by $50,000. If, however, accepting the special order would cause the regular customers to be dissatisfied or to demand lower prices, then Award Plus will have to trade off the $50,000 gain from accepting the special order against the operating income it might lose from regular customers. 11-5 11-19 (Contââ¬â¢d. ) 2. Award Plus has a capacity of 9,000 medals.Therefore, if it accepts the special one-time order of 2,500 medals, it can sell only 6,500 medals instead of the 7,500 medals that it currently sells to existing customers. That is, by accepting the special order, Award Plus must forgo sales of 1,000 medals to its regular customers. Alternatively, Award Plus can reject the special order and continue to sell 7,500 medals to its regular customers. Award Plus's operating income from selling 6,500 medals to regular customers and 2,500 medals under one-time special order follow: Revenues (6,500 ? $150) + (2,500 ? 100) 1 1 Direct materials (6,500 ? $35 ) + (2,500 ? $35 ) 2 2 Direct manufacturing labor (6,500 ? $40 ) +(2,500 ? $40 ) 3 Batch manufacturing costs (130 ? $500) + (25 ? $500) Fixed manufacturing costs Fixed marketing costs Total costs Operating income 1 $1,225,000 315,000 360,000 77,500 275,000 175,000 1,202,500 $ 22,500 $35 = $262,500 7,500 2 $40 = 300,000 7,500 3 Award Plus makes regular medals in batch sizes of 50. To produce 6,500 medals requires 130 (6,500 ? 50) batches. Accepting the special order will result in a decrease in operating income of $15,000 ($37,500 ââ¬â $22,500).The special order should, therefore, be rejected. A more direct approach would be to focus on the incremental effectsââ¬âââ¬âthe benefits of accepting the special order of 2,500 units versus the costs of selling 1,000 fewer units to regular customers. Increase in operating income from the 2,500-unit special order equals $50,000 (requirement 1). The l oss in operating income from selling 1,000 fewer units to regular customers equals: Lost revenue, $150 ? 1,000 Savings in direct materials costs, $35 ? 1,000 Savings in direct manufacturing labor costs, $40 ? 1,000 Savings in batch manufacturing costs, $500 ? 0 Operating income lost $(150,000) 35,000 40,000 10,000 $ (65,000) Accepting the special order will result in a decrease in operating income of $15,000 ($50,000 ââ¬â $65,000). The special order should, therefore, be rejected. 3. Award Plus should not accept the special order. Increase in operating income by selling 2,500 units under the special order (requirement 1) Operating income lost from existing customers ($10 ? 7,500) Net effect on operating income of accepting special order The special order should, therefore, be rejected. $ 50,000 (75,000) $(25,000) 11-6 11-20 (30 min. ) Make versus buy, activity-based costing. . The expected manufacturing cost per unit of CMCBs in 2004 is as follows: Total Manufacturing Manufactur ing Costs of CMCB Cost per Unit (1) (2) = (1) ? 10,000 $1,700,000 $170 450,000 45 120,000 12 320,000 800,000 $3,390,000 32 80 $339 Direct materials, $170 ? 10,000 Direct manufacturing labor, $45 ? 10,000 Variable batch manufacturing costs, $1,500 ? 80 Fixed manufacturing costs Avoidable fixed manufacturing costs Unavoidable fixed manufacturing costs Total manufacturing costs 2. The following table identifies the incremental costs in 2004 if Svenson (a) made CMCBs and (b) purchased CMCBs from Minton.Total Incremental Costs Make Buy $ 3,000,000 $1,700,000 450,000 120,000 320,000 $2,590,000 $3,000,000 $410,000 Per-Unit Incremental Costs Make Buy $300 $170 45 12 32 $259 $300 $41 Incremental Items Cost of purchasing CMCBs from Minton Direct materials Direct manufacturing labor Variable batch manufacturing costs Avoidable fixed manufacturing costs Total incremental costs Difference in favor of making Note that the opportunity cost of using capacity to make CMCBs is zero since Svenson woul d keep this capacity idle if it purchases CMCBs from Minton.Svenson should continue to manufacture the CMCBs internally since the incremental costs to manufacture are $259 per unit compared to the $300 per unit that Minton has quoted. Note that the unavoidable fixed manufacturing costs of $800,000 ($80 per unit) will continue to be incurred whether Svenson makes or buys CMCBs. These are not incremental costs under either the make or the buy alternative and are, hence, irrelevant. 3. Svenson should continue to make CMCBs. The simplest way to analyze this problem is to recognize that Svenson would prefer to keep any excess capacity idle rather than use it to make CB3s. Why?Because expected incremental future revenues from CB3s, $2,000,000 are less than expected incremental future costs, $2,150,000. If Svenson keeps its capacity idle, we know from requirement 2 that it should make CMCBs rather than buy them. 11-7 11-20 (Contââ¬â¢d. ) An important point to note is that, because Svens on forgoes no contribution by not being able to make and sell CB3s, the opportunity cost of using its facilities to make CMCBs is zero. It is, therefore, not forgoing any profits by using the capacity to manufacture CMCBs. If it does not manufacture CMCBs, rather than lose money on CB3s, Svenson will keep capacity idle.A longer and more detailed approach is to use the total alternatives or opportunity cost analyses shown in Exhibit 11-7 of the chapter. Choices for Svenson Make CMCBs Buy CMCBs Buy CMCBs and Do Not and Do Not and Make Relevant Items Make CB3s Make CB3s CB3s TOTAL-ALTERNATIVES APPROACH TO MAKE-OR-BUY DECISIONS Total incremental costs of making/buying CMCBs (from requirement 2) Excess of future costs over future revenues from CB3s Total relevant costs $2,590,000 0 $2,590,000 $3,000,000 0 $3,000,000 $3,000,000 150,000 $3,150,000 Svenson will minimize manufacturing costs by making CMCBs.OPPORTUNITY-COST APPROACH TO MAKE-OR-BUY DECISIONS Total incremental costs of making/b uying CMCBs (from requirement 2) $2,590,000 $3,000,000 Opportunity cost: profit contribution forgone because capacity will not be used to make CB3s 0* 0* Total relevant costs $2,590,000 $3,000,000 $3,000,000 0 $3,000,000 *Opportunity cost is 0 because Svenson does not give up anything by not making CB3s. Svenson is best off leaving the capacity idle (rather than manufacturing and selling CB3s). 11-8 11-21 (10 min. ) Inventory decision, opportunity costs. 1. Unit cost, orders of 20,000 Unit cost, order of 240,000 (0. 5 ? $8. 00) Alternatives under consideration: (a) Buy 240,000 units at start of year. (b) Buy 20,000 units at start of each month. Average investment in inventory: (a) (240,000 ? $7. 60) ? 2 (b) ( 20,000 ? $8. 00) ? 2 Difference in average investment $8. 00 $7. 60 $912,000 80,000 $832,000 Opportunity cost of interest forgone from 240,000-unit purchase at start of year = $832,000 ? 0. 08 = $66,560 2. No. The $66,560 is an opportunity cost rather than an incremental or out lay cost. No actual transaction records the $66,560 as an entry in the accounting system. 3.The following table presents the two alternatives: Alternative A: Alternative B: Purchase Purchase 240,000 20,000 spark plugs at spark plugs beginning of at beginning year of each month Difference (1) (2) (3 )= (1) ââ¬â (2) Annual purchase-order costs (1 ? $200; 12 ? $200) Annual purchase (incremental) costs (240,000 ? $7. 60; 240,000 ? $8) Annual interest income that could be earned if investment in inventory were invested (opportunity cost) (8% ? $912,000; 8% ? $80,000) Relevant costs $ 200 1,824,000 $ 2,400 1,920,000 $ (2,200) (96,000) 72,960 $1,897,160 6,400 $1,928,800 66,560 $ (31,640)Column (3) indicates that purchasing 240,000 spark plugs at the beginning of the year is preferred relative to purchasing 20,000 spark plugs at the beginning of each month because the lower purchase cost exceeds the opportunity cost of holding larger inventory. If other incremental benefits of holding l ower inventory such as lower insurance, materials handling, storage, obsolescence, and breakage costs were considered, the costs under Alternative A would have been higher, and Alternative B may have been preferred. 11-9 11-22 (20ââ¬â25 min. ) Relevant costs, contribution margin, product emphasis. 1. Cola $18. 0 13. 50 $ 4. 50 Lemonade $19. 20 15. 20 $ 4. 00 Punch $26. 40 20. 10 $ 6. 30 Natural Orange Juice $38. 40 30. 20 $ 8. 20 Selling price Deduct variable cost per case Contribution margin per case 2. The argument fails to recognize that shelf space is the constraining factor. There are only 12 feet of front shelf space to be devoted to drinks. Sexton should aim to get the highest daily contribution margin per foot of front shelf space: Natural Orange Juice $ 8. 20 ? 5 Contribution margin per case Sales (number of cases) per foot of shelf space per day Daily contribution per foot of front shelf space 3.Cola $ 4. 50 ? 25 Lemonade $ 4. 00 ? 24 Punch $ 6. 30 ? 4 $112. 50 $96. 00 $25. 20 $41. 00 The allocation that maximizes the daily contribution from soft drink sales is: Daily Contribution per Foot of Front Shelf Space $112. 50 96. 00 41. 00 25. 20 Cola Lemonade Natural Orange Juice Punch Feet of Shelf Space 6 4 1 1 Total Contribution Margin per Day $ 675. 00 384. 00 41. 00 25. 20 $1,125. 20 The maximum of six feet of front shelf space will be devoted to Cola because it has the highest contribution margin per unit of the constraining factor.Four feet of front shelf space will be devoted to Lemonade, which has the second highest contribution margin per unit of the constraining factor. No more shelf space can be devoted to Lemonade since each of the remaining two products, Natural Orange Juice and Punch (that have the second lowest and lowest contribution margins per unit of the constraining factor) must each be given at least one foot of front shelf space. 11-10 11-23 (10 min. ) Selection of most profitable product. Only Model 14 should be produced. The ke y to this problem is the relationship of manufacturing overhead to each product.Note that it takes twice as long to produce Model 9; machine-hours for Model 9 are twice that for Model 14. Management should choose the product mix that maximizes operating income for a given production capacity (the scarce resource in this situation). In this case, Model 14 will yield a $9. 50 contribution to fixed costs per machine hour, and Model 9 will yield $9. 00: Model 9 Selling price Variable costs per unit Contribution margin per unit Relative use of machine-hours per unit of product Contribution margin per machine hour $100. 00 82. 00 $ 18. 00 ? 2 $ 9. 00 Model 14 $70. 00 60. 50 $ 9. 50 ? $ 9. 50 11-23 Excel Application Decision-Making and Relevant Information Body-Builders, Inc. Original Data Selling Price Costs Direct materials Direct manufacturing labor Variable manufacturing overhead Fixed manufacturing overhead Marketing costs (all variable) Total costs Operating Income Model 9 $100. 00 2 8. 00 15. 00 25. 00 10. 00 14. 00 92. 00 $8. 00 $70. 00 13. 00 25. 00 12. 50 5. 00 10. 00 65. 50 $4. 50 Product Mix Analysis Selling price Variable cost per unit Contribution margin per unit Relative use of machine-hours per unit of product Contribution margin per machine-hour Model 9 $100 82. 0 18. 00 2 $9. 00 Model 14 $70 60. 50 9. 50 1 $9. 50 11-11 11-24 (20 min. ) Which base to close, relevant-cost analysis, opportunity costs. The future outlay operating costs will be $400 million regardless of which base is closed, given the additional $100 million in costs at Everett if Alameda is closed. Further, one of the bases will permanently remain open while the other will be shut down. The only relevant revenue and cost comparisons are: a. $500 million from sale of the Alameda base. Note that the historical cost of building the Alameda base ($100 million) is irrelevant.Note, also, that future increases in the value of the land at the Alameda base is also irrelevant. One of the bases mu st be kept open, so if it is decided to keep the Alameda base open, the Defense Department will not be able to sell this land at a future date. b. $60 million in savings in fixed income note if the Everett base is closed. Again, the historical cost of building the Everett base ($150 million) is irrelevant. The relevant costs and benefits analysis favors closing the Alameda base despite the objections raised by the California delegation in Congress. The net benefit equals $440 ($500 ââ¬â $60) million. 11-25 (25? 0 min. ) Closing and opening stores. 1. Solution Exhibit 11-25, Column 1, presents the relevant loss in revenues and the relevant savings in costs from closing the Rhode Island store. Lopez is correct that Sanchez Corporationââ¬â¢s operating income would increase by $7,000 if it closes down the Rhode Island store. Closing down the Rhode Island store results in a loss of revenues of $860,000 but cost savings of $867,000 (from cost of goods sold, rent, labor, utilities, and corporate costs). Note that by closing down the Rhode Island store, Sanchez Corporation will save none of the equipment-related costs because this is a past cost.Also note that the relevant corporate overhead costs are the actual corporate overhead costs $44,000 that Sanchez expects to save by closing the Rhode Island store. The corporate overhead of $40,000 allocated to the Rhode Island store is irrelevant to the analysis. 2. Solution Exhibit 11-25, Column 2, presents the relevant revenues and relevant costs of opening another store like the Rhode Island store. Lopez is correct that opening such a store would increase Sanchez Corporationââ¬â¢s operating income by $11,000.Incremental revenues of $860,000 exceed the incremental costs of $849,000 (from higher cost of goods sold, rent, labor, utilities, and some additional corporate costs). Note that the cost of equipment written off as depreciation is relevant because it is an expected future cost that Sanchez will incur only i f it opens the new store. Also note that the relevant corporate overhead costs are the $4,000 of actual corporate overhead costs that Sanchez expects to incur as a result of opening the new store. Sanchez may, in fact, allocate more than $4,000 of corporate overhead to the new store but this allocation is irrelevant to the analysis. 1-12 11-25 (Contââ¬â¢d. ) The key reason that Sanchezââ¬â¢s operating income increases either if it closes down the Rhode Island store or if it opens another store like it is the behavior of corporate overhead costs. By closing down the Rhode Island store, Sanchez can significantly reduce corporate overhead costs presumably by reducing the corporate staff that oversees the Rhode Island operation. On the other hand, adding another store like Rhode Island does not increase actual corporate costs by much, presumably because the existing corporate staff will be able to oversee the new store as well.SOLUTION EXHIBIT 11-25 Relevant-Revenue and Relevant-C ost Analysis of Closing Rhode Island Store and Opening Another Store Like It. Incremental (Loss in Revenues) Revenues and and Savings in (Incremental Costs) Costs from of Opening New Closing Rhode Store Like Rhode Island Store Island Store (1) (2) Revenues Cost of goods sold Lease rent Labor costs Depreciation of equipment Utilities (electricity, heating) Corporate overhead costs Total costs Effect on operating income (loss) $(860,000) 660,000 75,000 42,000 0 46,000 44,000 867,000 $ 7,000 $ 860,000 (660,000) (75,000) (42,000) (22,000) (46,000) (4,000) (849,000) $ 11,000 1-13 11-26 (20 min. ) Choosing customers. If Broadway accepts the additional business from Kelly, it would take an additional 500 machine-hours. If Broadway accepts all of Kellyââ¬â¢s and Taylorââ¬â¢s business for February, it would require 2,500 machine-hours (1,500 hours for Taylor and 1,000 hours for Kelly). Broadway has only 2,000 hours of machine capacity. It must, therefore, choose how much of the Taylor or Kelly business to accept. To maximize operating income, Broadway should maximize contribution margin per unit of the constrained resource. Fixed costs will remain unchanged at $100,000 regardless of the business Broadway chooses to accept in February, and is, therefore, irrelevant. ) The contribution margin per unit of the constrained resource for each customer in January is: Taylor Corporation $78,000 = $52 1,500 Kelly Corporation $32,000 = $64 500 Contribution margin per machine-hour Since the $80,000 of additional Kelly business in February is identical to jobs done in January, it will also have a contribution margin of $64 per machine-hour, which is greater than the contribution margin of $52 per machine-hour from Taylor.To maximize operating income, Broadway should first allocate all the capacity needed to take the Kelly Corporation business (1,000 machine-hours) and then allocate the remaining 1,000 (2,000 ââ¬â 1,000) machine-hours to Taylor. Taylor Corporation $52 ? 1, 000 $52,000 Kelly Corporation $64 ? 1,000 $64,000 Total Contribution margin per machine-hour Machine-hours to be worked Contribution margin Fixed costs Operating income $116,000 100,000 $ 16,000 11-14 11-27 (30ââ¬â40 min. ) Relevance of equipment costs. 1a. Statements of Cash Receipts and Disbursements Keep Year 2, 3, 4 $150,000 (110,000) (15,000)Year 1 Receipts from operations: Revenues Deduct disbursements: Other operating costs Operation of machine Purchase of ââ¬Å"oldâ⬠machine Purchase of ââ¬Å"newâ⬠equipment Cash inflow from sale of old equipment Net cash inflow $150,000 (110,000) ( 15,000) (20,000)* Four Years Together $600,000 (440,000) (60,000) (20,000) Buy New Machine Four Year Years Year 1 2, 3, 4 Together $150,000 (110,000) (9,000) (20,000) (24,000) 8,000 $ (5,000) $150,000 (110,000) (9,000) $600,000 (440,000) (36,000) (20,000) (24,000) 8,000 $ 88,000 $ 5,000 $ 25,000 80,000 $ 31,000 *Some students ignore this item because it is the same for each altern ative. However, note that a statement for the entire year has been requested. Obviously, the $20,000 would affect Year 1 only under both the ââ¬Å"keepâ⬠and ââ¬Å"buyâ⬠alternatives. The difference is $8,000 for four years taken together. In particular, note that the $20,000 book value can be omitted from the comparison. Merely cross out the entire line; although the column totals are affected, the net difference is still $8,000. 11-15 11-27 (Contââ¬â¢d. ) 1b.Again, the difference is $8,000: Income Statements Keep Year 1, 2, 3, 4 Revenues Costs (excluding disposal): Other operating costs Depreciation Operating costs of machine Total costs (excluding disposal) Loss on disposal: Book value (ââ¬Å"costâ⬠) Proceeds (ââ¬Å"revenueâ⬠) Loss on disposal Total costs Operating income $150,000 110,000 5,000 15,000 130,000 Four Years Together $600,000 440,000 20,000 60,000 520,000 Buy New Machine Four Years Year Together Year 1 2, 3, 4 $150,000 $150,000 110,000 6,000 9,000 125,000 110,000 6,000 9,000 125,000 $600,000 440,000 24,000 36,000 500,000 20,000* (8,000) 12,000 512,000 $ 88,000 30,000 $ 20,000 520,000 $ 80,000 20,000 (8,000) 12,000 137,000 125,000 $ 13,000 $ 25,000 *As in part (1), the $20,000 book value may be omitted from the comparison without changing the $8,000 difference. This adjustment would mean excluding the depreciation item of $5,000 per year (a cumulative effect of $20,000) under the ââ¬Å"keepâ⬠alternative and excluding the book value item of $20,000 in the loss on disposal computation under the ââ¬Å"buyâ⬠alternative. 1c. The $20,000 purchase cost of the old equipment, the revenues, and the other costs are irrelevant because their amounts are common to both alternatives. 2.The net difference would be unaffected. Any number may be substituted for the original $20,000 figure without changing the final answer. Of course, the net cash outflows under both alternatives would be high. The Auto Wash manager really b lundered. However, keeping the old equipment will increase the cost of the blunder to the cumulative tune of $8,000 over the next four years. 3. Book value is irrelevant in decisions about the replacement of equipment, because it is a past (historical) cost. All past costs are down the drain. Nothing can change what has already been spent or what has already happened. The $20,000 has been spent.How it is subsequently accounted for is irrelevant. The analysis in requirement (1) clearly shows that we may completely ignore the $20,000 and still have a correct analysis. The only relevant items are those expected future items that will differ among alternatives. 11-16 11-27 (Contââ¬â¢d. ) Despite the economic analysis shown here, many managers would keep the old machine rather than replace it. Why? Because, in many organizations, the income statements of part (2) would be a principal means of evaluating performance. Note that the first-year operating income would be higher under the à ¢â¬Å"keepâ⬠alternative.The conventional accrual accounting model might motivate managers toward maximizing their first-year reported operating income at the expense of long-run cumulative betterment for the organization as a whole. This criticism is often made of the accrual accounting model. That is, the action favored by the ââ¬Å"correctâ⬠or ââ¬Å"bestâ⬠economic decision model may not be taken because the performance-evaluation model is either inconsistent with the decision model or because the focus is on only the short-run part of the performance-evaluation model. There is yet another potential conflict etween the decision model and the performance evaluation model. Replacing the machine so soon after it is purchased may reflect badly on the managerââ¬â¢s capabilities and performance. Why didnââ¬â¢t the manager search and find the new machine before buying the old machine? Replacing the old machine one day later at a loss may make the manager appear i ncompetent to his or her superiors. If the managerââ¬â¢s bosses have no knowledge of the better machine, the manager may prefer to keep the existing machine rather than alert his or her bosses about the better machine. 11-28 (30 min. Equipment upgrade versus replacement (A. Spero, adapted). 1. Solution Exhibit 11-28 presents a cost comparison of the upgrade and replacement alternatives for the three years taken together. It indicates that Pacifica Corporation should replace the production line because it is better off by $180,000 by replacing rather than upgrading. SOLUTION EXHIBIT 11-28 Comparing Upgrade and Replace Alternatives Three Years Together Upgrade Replace Difference (1) (2) (3) = (1) ââ¬â (2) $2,160,000 $1,620,000 $ 540,000 (90,000) 90,000 300,000 $2,460,000 750,000 $2,280,000 (450,000) $ 180,000 Cash-operating costs, $12; $9 ? 80,000 Current disposal price One-time capital costs, written off periodically as depreciation Total relevant costs Note that sales and boo k value of the existing machine are the same under both alternatives and, hence, are irrelevant. 11-17 11-28 (Contââ¬â¢d. ) 2a. Suppose the capital expenditure to replace the production line is $X. Using data from Solution Exhibit 11-28, the cost of replacing the production line is equal to $1,620,000 ââ¬â $90,000 + $X. Using data from Solution Exhibit 11-28, the cost of upgrading the production line is equal to $2,160,000 + $300,000 = $2,460,000.We want to find $X such that $1,620,000 ââ¬â $90,000 + $X = $2,460,000 that is, $1,530,000 + $X = $2,460,000 that is, $X = $2,460,000 ââ¬â $1,530,000 or $X = $ 930,000 Pacifica would prefer replacing, rather than upgrading, the existing line if the replacement cost of the new line does not exceed $930,000. Note that the $930,000 can also be obtained by adding the $180,000 calculated in requirement 1 to the replacement cost of $750,000 for the new machine assumed in requirement 1 ($750,000 + $180,000 = $930,000). 2b. Suppose t he units produced and sold each year equal y.Using data from Solution Exhibit 11-28, the cost of replacing the production line is $9y ââ¬â $90,000 + $750,000, while the cost of upgrading is $12y + $300,000. We solve for the y at which the two costs are the same. $9y ââ¬â $90,000 + $750,000 $9y + $660,000 $3y y = = = = $12y + $300,000 $12y + $300,000 $360,000 120,000 units For expected production and sales of less than 120,000 units over 3 years (40,000 units per year), the upgrade alternative is cheaper. When production and sales are low, the higher operating costs of upgrading are more than offset by the significant savings in capital costs when upgrading relative to replacing.For expected production and sales exceeding 120,000 units over 3 years, the replace alternative is cheaper. For high output, the benefits of the lower operating costs of replacing, relative to upgrading, exceed the higher capital costs. 3. Operating income for the first year under the upgrade and repl ace alternatives are as follows: Upgrade Replace Revenues $25 ? 60,000 $1,500,000 $1,500,000 Cash-operating costs $12 ? 60,000, $9 ? 60,000 720,000 540,000 a b Depreciation 220,000 250,000 c Loss on disposal of old production line ââ¬âââ¬â 270,000 Total costs 940,000 1,060,000 Operating income $ 560,000 $ 440,000 a $360,000 + $300,000) ? 3 = $220,000 $750,000 ? 3 = $250,000 c Book value ââ¬â current disposal price = $360,000 ââ¬â $90,000 = $270,000 b First-year operating income is higher by $120,000 under the upgrade alternative. If first year's operating income is an important component of Azinger's bonus, he would prefer the upgrade over the replace alternative even though the decision model (in requirement 1) prefers the replace to the upgrade alternative. This exercise illustrates the conflict between the decision model and the performance evaluation model. 11-18 11-29 (30 min. Contribution approach, relevant costs. 1. Average one-way fare per passenger Commissio n at 8% of $500 Net cash to Air Frisco per ticket Average number of passengers per flight Revenues per flight ($460 ? 200) Food and beverage cost per flight ($20 ? 200) Total contribution margin from passengers per flight 2. If fare is Commission at 8% of $480 Net cash per ticket Food and beverage cost per ticket Contribution margin per passenger Total contribution margin from passengers per flight ($421. 60 ? 212) All other costs are irrelevant. $ 500 40 $ 460 ? 200 $92,000 4,000 $88,000 $480. 0 38. 40 441. 60 20. 00 $421. 60 $89,379. 20 On the basis of quantitative factors alone, Air Frisco should decrease its fare to $480 because reducing the fare gives Air Frisco a higher contribution margin from passengers ($89,379. 20 versus $88,000). 3. In evaluating whether Air Frisco should charter its plane to Travel International, we compare the charter alternative to the solution in requirement 2 because requirement 2 is preferred to requirement 1. Under requirement 2, contribution from passengers Deduct fuel costs Total contribution per flight $89,379. 0 14,000. 00 $75,379. 20 Air Frisco gets $74,500 per flight from chartering the plane to Travel International. On the basis of quantitative financial factors, Air Frisco is better off not chartering the plane and, instead, lowering its own fares. Other qualitative factors that Air Frisco should consider in coming to a decision are: a. The lower risk from chartering its plane relative to the uncertainties regarding the number of passengers it might get on its scheduled flights. b. The stability of the relationship between Air Frisco and Travel International.If this is not a long-term arrangement, Air Frisco may lose current market share and not benefit from sustained charter revenues. 11-19 11-30 (30 min. ) Relevant costs, opportunity costs. 1. Easyspread 2. 0 has a higher relevant operating income than Easyspread 1. 0. Based on this analysis, Easyspread 2. 0 should be introduced immediately: Easyspread 1. 0 $150 $ 0 0 $150 Easyspread 2. 0 $185 $25 25 $160 Relevant revenues Relevant costs: Manuals, diskettes, compact discs Total relevant costs Relevant operating income Reasons for other cost items being irrelevant are: Easyspread 1. â⬠¢ Manuals, diskettesââ¬âalready incurred â⬠¢ Development costsââ¬âalready incurred â⬠¢ Marketing and administrativeââ¬âfixed costs of period Easyspread 2. 0 â⬠¢ Development costsââ¬âalready incurred â⬠¢ Marketing and administrationââ¬âfixed costs of period Note that total marketing and administration costs will not change whether Easyspread 2. 0 is introduced on July 1, 2003, or on October 1, 2003. 2. Other factors to be considered: a. Customer satisfaction. If 2. 0 is significantly better than 1. 0 for its customers, a customer driven organization would immediately introduce it unless other factors offset this bias towards ââ¬Å"do what is best for the customer. b. Quality level of Easyspread 2. 0. It is critical for new s oftware products to be fully debugged. Easyspread 2. 0 must be error-free. Consider an immediate release only if 2. 0 passes all quality tests and can be fully supported by the salesforce. c. Importance of being perceived to be a market leader. Being first in the market with a new product can give Basil Software a ââ¬Å"first-mover advantage,â⬠e. g. , capturing an initial large share of the market that, in itself, causes future potential customers to lean towards purchasing Easyspread 2. 0. Moreover, by introducing 2. earlier, Basil can get quick feedback from users about ways to further refine the software while its competitors are still working on their own first versions. Moreover, by locking in early customers, Basil may increase the likelihood of these customers also buying future upgrades of Easyspread 2. 0. d. Morale of developers. These are key people at Basil Software. Delaying introduction of a new product can hurt their morale, especially if a competitor then preem pts Basil from being viewed as a market leader. 11-20 11-31 (20 min. ) Opportunity costs (H. Schaefer). 1.The opportunity cost to Wolverine of producing the 2,000 units of Orangebo is the contribution margin lost on the 2,000 units of Rosebo that would have to be forgone, as computed below: Selling price Variable costs per unit: Direct materials Direct manufacturing labor Variable manufacturing overhead Variable marketing costs Contribution margin per unit Contribution margin for 2,000 units $20 $2 3 2 4 11 $ 9 $ 18,000 The opportunity cost is $18,000. Opportunity cost is the maximum contribution to operating income that is forgone (rejected) by not using a limited resource in its next-best alternative use. . Contribution margin from manufacturing 2,000 units of Orangebo and purchasing 2,000 units of Rosebo from Buckeye is $16,000, as follows: Manufacture Orangebo Selling price Variable costs per unit: Purchase costs Direct materials Direct manufacturing labor Variable manufacturing costs Variable marketing overhead Variable costs per unit Contribution margin per unit Contribution margin from selling 2,000 units of Orangebo and 2,000 units of Rosebo $15 ââ¬â 2 3 2 2 9 $ 6 $12,000 Purchase Rosebo $20 14 Total 4 18 $ 2 $4,000 $16,000As calculated in requirement 1, Wolverine's contribution margin from continuing to manufacture 2,000 units of Rosebo is $18,000. Accepting the Miami Company and Buckeye offer will cost Wolverine $2,000 ($16,000 ââ¬â $18,000). Hence, Wolverine should refuse the Miami Company and Buckeye Corporation's offers. 3. The minimum price would be $9, the sum of the incremental costs as computed in requirement 2. This follows because, if Wolverine has surplus capacity, the opportunity cost = $0. For the short-run decision of whether to accept Orangebo's offer, fixed costs of Wolverine are irrelevant.Only the incremental costs need to be covered for it to be worthwhile for Wolverine to accept the Orangebo offer. 11-21 11-32 (30-40 min. ) Product mix, relevant costs (N. Melumad, adapted). 1. Selling price Variable manufacturing cost per unit Variable marketing cost per unit Total variable costs per unit Contribution margin per unit Contributi on margin per hour of the constraine d resource (the regular machine) Total contribution margin from selling only R3 or only HP6 R3: $25 ? 50,000; HP6: $30 ? 0,000 Less Lease costs of high-precision machine to produce and sell HP6 Net relevant benefit R3 $100 60 15 75 $ 25 $25 = $25 1 HP6 $150 100 35 135 $ 15 $15 = $30 0. 5 $1,250,000 ? $1,250,000 $1,500,000 300,000 $1,200,000 Even though HP6 has the higher contribution margin per unit of the constrained resource, the fact that Pendleton must incur additional costs of $300,000 to achieve this higher contribution margin means that Pendleton is better off using its entire 50,000-hour capacity on the regular machine to produce and sell 50,000 units (50,000 hours ? 1 hour per unit) of R3.The additional contribution from selling HP6 rather than R3 is $250,000 ($1,500,000 ? $1,250,000), which is not enough to cover the additional costs of leasing the high-precision machine. Note that, because all other overhead costs are fixed and cannot be changed, they are irrelevant for the decision. 2. If capacity of the regular machines is increased by 15,000 machine-hours to 65,000 machine-hours (50,000 originally + 15,000 new), the net relevant benefit from producing R3 and HP6 is as follows: R3 Total contribution margin from selling only R3 or only HP6 R3: $25 ? 5,000; HP6: $30 ? 65,000 Less Lease costs of high-precision machine that would be incurred if HP6 is produced and sold Less Cost of increasing capacity by 15,000 hours on regular machine Net relevant benefit HP6 $1,625,000 $1,950,000 300,000 150,000 150,000 $1,475,000 $1,500,000 11-22 11-32 (Contââ¬â¢d. ) Investing in the additional capacity increases Pendletonââ¬â¢s operating income by $250,000 ($1,500,000 calculated in requirement 2 minus $1,250,000 calc ulated in requirement 1), so Pendleton should add 15,000 hours to the regular machine.With the extra capacity available to it, Pendleton should use its entire capacity to produce HP6. Using all 65,000 hours of capacity to produce HP6 rather than to produce R3 generates additional contribution margin of $325,000 ($1,950,000 ? $1,625,000) which is more than the additional cost of $300,000 to lease the highprecision machine. Pendleton should therefore produce and sell 130,000 units of HP6 (65,000 hours ? 0. 5 hours per unit of HP6) and zero units of R3. 3.R3 Selling price Variable manufacturing costs per unit Variable marketing costs per unit Total variable costs per unit Contribution margin per unit Contributi on margin per hour of the constraine d resource (the regular machine) $100 60 15 75 $ 25 $25 = $25 1 HP6 $150 100 35 135 $ 15 S3 $120 70 15 85 $ 35 $15 $35 = $30 = $35 0 . 5 1 The first step is to compare the operating profits that Pendleton could earn if it accepted the Carter Corporation offer for 20,000 units with the operating profits Pendleton is currently earning.S3 has the highest contribution margin per hour on the regular machine and requires no additional investment such as leasing a high-precision machine. To produce the 20,000 units of S3 requested by Carter Corporation, Pendleton would require 20,000 hours on the regular machine resulting in contribution margin of $35 ? 20,000 = $700,000. Pendleton now has 45,000 hours available on the regular machine to produce R3 or HP6. R3 Total contribution margin from selling only R3 or only HP6 R3: $25 ? 45,000; HP6: $30 ? 45,000 Less Lease osts of high-precision machine to produce and sell HP 6 Net relevant benefit HP6 $1,125,000 $1,350,000 ? 300,000 $1,125,000 $1,050,000 Pendleton should use all the 45,000 hours of available capacity to produce 45,000 units of R3. Thus, the product mix that maximizes operating income is 20,000 units of S3, 45,000 units of R3, and zero units of HP6. This optimal mix res ults in a contribution margin of $1,825,000 ($700,000 from S3 and $1,125,000 from R3). Relative to requirement 2, operating income increases by $325,000 ($1,825,000 minus $1,500,000 calculated in requirement 2).Hence, Pendleton should accept the Carter Corporation business and supply 20,000 units of S3. 11-23 11-33 (35ââ¬â40 min. ) Discontinuing a product line, selling more units. 1. The incremental revenue losses and incremental savings in cost by discontinuing the Tables product line follows: Difference: Incremental (Loss in Revenues) and Savings in Costs from Dropping Tables Line Revenues Direct materials and direct manufacturing labor Depreciation on equipment Marketing and distribution General administration Corporate office costs Total costs Operating income (loss) $(500,000) 300,000 0 70,000 0 0 370,000 $(130,000)Dropping the Tables product line results in revenue losses of $500,000 and cost savings of $370,000. Hence, Grossman Corporationââ¬â¢s operating income will b e $130,000 higher if it does not drop the Tables line. Note that, by dropping the Tables product line, Home Furnishings will save none of the depreciation on equipment, general administration costs, and corporate office costs, but it will save variable manufacturing costs and all marketing and distribution costs on the Tables product line. . Grossmanââ¬â¢s will generate incremental operating income of $128,000 from selling 4,000 additional tables and, hence, should try to increase table sales. The calculations follow: Incremental Revenues (Costs) and Operating Income $500,000 (300,000) (42,000)* (30,000)â⬠0** 0** $128,000 Revenues Direct materials and direct manufacturing labor Cost of equipment written off as depreciation Marketing and distribution costs General administration costs Corporate office costs Operating income Note that the additional costs of equipment are relevant future costs for the ââ¬Å"selling more tables decisionâ⬠because they represent increment al future costs that differ between the alternatives of selling and not selling additional tables. â⬠Current marketing and distribution costs which varies with number of shipments = $70,000 ââ¬â $40,000 = $30,000. As the sales of tables double, the number of shipments will double, resulting in incremental marketing and distribution costs of (2 ? $30,000) ââ¬â $30,000 = $30,000. *General administration and corporate office costs will be unaffected if Grossman decides to sell more tables. Hence, these costs are irrelevant for the decision. 11-24 11-34 (30 min. ) Discontinuing or adding another division (continuation of 11-33). 1. Solution Exhibit 11-34, Column 1, presents the relevant loss of revenues and the relevant savings in costs from closing the Northern Division. As the calculations show, Grossmanââ¬â¢s operating income would decrease by $140,000 if it shut down the Northern Division (loss in revenues of $1,500,000 versus savings in costs of $1,360,000).Grossman will save variable manufacturing costs, marketing and distribution costs, and division general administration costs by closing the Northern Division but equipment-related depreciation and corporate office allocations are irrelevant to the decision. Equipment-related costs are irrelevant because they are past costs (and the equipment has zero disposal price). Corporate office costs are irrelevant because Grossman will not save any actual corporate office costs by closing the Northern Division. The corporate office costs that used to be allocated to the Northern Division will be allocated to other divisions. . The manager at corporate headquarters responsible for making the decision is evaluated on Northern Divisionââ¬â¢s operating income after allocating corporate office costs. The manager will evaluate the options as follows: If the manager does not close the Northern Division in 2002, the division is expected to show an operating loss of $110,000 after allocating all corporate office costs. If the manager closes the Northern Division, the division would show an operating loss of $100,000 from the write off of equipment.It would show no revenues and, hence, would not attract any corporate office costs. It would also not incur any manufacturing, marketing and distribution, and general administration costs. From the viewpoint of maximizing the operating income against which the manager is evaluated, the manager would prefer to shut down Northern Division (and show an operating loss of $100,000 instead of an operating loss of $110,000 by operating it). In fact, the manager might argue that even the $100,000 operating loss is more a consequence of accounting write offs rather than a ââ¬Å"realâ⬠operating loss.Recall from requirement 1 that the decision model favored keeping the Northern Division open. The performance evaluation model of the manager making the decision suggests that the Northern Division be closed. Hence, the performance evaluation model is inconsistent with the decision model. 3. Solution Exhibit 11-34, Column 2, presents the relevant revenues and relevant costs of opening the Southern Division (a division whose revenues and costs are expected to be identical to the revenues and costs of the Northern Division).Grossman should open the Southern Division because it would increase operating income by $40,000 (increase in relevant revenues of $1,500,000 and increase in relevant costs of $1,460,000). The relevant costs include direct materials, direct manufacturing labor, marketing and distribution, equipment, and division general administration costs but not corporate office costs. Note, in particular, that the cost of equipment written off as depreciation is relevant because it is an expected future cost that Grossman will incur only if it opens the Southern Division.Corporate office costs are irrelevant because actual corporate office costs will not change if Grossman opens the Southern Division. The current corpora te staff will be able to oversee the Southern Divisionââ¬â¢s operations. Grossman will allocate some corporate office costs to the Southern Division but this allocation represents corporate office costs that are already currently being allocated to some other division. Because actual total corporate office costs do not change, they are irrelevant to the division. 1-25 11-34 (Contââ¬â¢d. ) SOLUTION EXHIBIT 11-34 Relevant-Revenue and Relevant-Cost Analysis for Closing Northern Division and Opening Southern Division Incremental (Loss in Revenues) Revenues and and Savings in (Incremental Costs) Costs from Closing from Opening Northern Division Southern Division (1) (2) $(1,500,000) $1,500,000 825,000 0 205,000 330,000 0 1,360,000 $ (140,000) (825,000) (100,000) (205,000) (330,000) 0 (1,460,000) $ 40,000Revenues Variable direct materials and direct manufacturing labor costs Equipment cost written off as depreciation Marketing and distribution costs Division general administration c osts Corporate office costs Total costs Effect on operating income (loss) 11-35 (30ââ¬â40 min. ) Make or buy, unknown level of volume (A. Atkinson). 1. Let X = 1 starter assembly. The variable costs required to manufacture 150,000X are: Direct materials Direct manufacturing labor Variable manufacturing overhead Total variable costs $200,000 150,000 100,000 $450,000 The variable costs per unit are $450,000 ? 150,000 = $3. 00 per unit. 11-26 11-35 (Contââ¬â¢d. The data can be presented in both ââ¬Å"all dataâ⬠and ââ¬Å"relevant dataâ⬠formats: All Data Relevant Data Alternative Alternative Alternative Alternative 1: 2: 1: 2: Buy Make Buy Make Variable manufacturing costs $ 3X ââ¬â $ 3X ââ¬â Fixed general manufacturing overhead 150,000 $150,000 ââ¬â ââ¬â Fixed overhead, avoidable 100,000 ââ¬â 100,000 ââ¬â Division 2 manager's salary 40,000 50,000 40,000 $50,000 Division 3 manager's salary 50,000 ââ¬â 50,000 ââ¬â Purchase cost, if boug ht from Tidnish Electronics ââ¬â 4X ââ¬â 4X Total $340,000 $200,000 $190,000 $50,000 + $ 3X + $ 4X + $ 3X + $ 4X The number of units at which the costs of make and buy are equivalent is: All data analysis: or Relevant data analysis: $340,000 + $3X = $200,000 + $4X X = 140,000 $190,000 + $3X = $50,000 + $4X X = 140,000Assuming cost minimization is the objective, then: â⬠¢ If production is expected to be less than 140,000 units, it is preferable to buy units from Tidnish. â⬠¢ If production is expected to exceed 140,000 units, it is preferable to manufacture internally (make) the units. â⬠¢ If production is expected to be 140,000 units, this is the indifference point between buying units from Tidnish and internally manufacturing (making) the units. 2. The information on the storage cost, which is avoidable if self-manufacture is discontinued, is relevant; these storage charges represent current outlays that are avoidable if self-manufacture is discontinued. Assume t hese $50,000 charges are represented as an opportunity cost of the make alternative.The costs of internal manufacture that incorporate this $50,000 opportunity cost are: All data analysis: Relevant data analysis: All data analysis: Relevant data analysis: $390,000 + $3X $240,000 + $3X $390,000 + $3X X $240,000 + $3X X = = = = $200,000 + $4X 190,000 $50,000 + $4X 190,000 The number of units at which the costs of make and buy are equivalent is: If production is expected to be less than 190,000, it is preferable to buy units from Tidnish. If production is expected to exceed 190,000, it is preferable to manufacture the units internally. 11-27 11-36 (30 min. ) Make versus buy, activity-based costing, opportunity costs (N. Melumad and S. Reichelstein, adapted). 1. Relevant costs under buy alternative: Purchases, 10,000 ? $8. 0 Relevant costs under make alternative: Direct materials Direct manufacturing labor Variable manufacturing overhead Inspection, setup, materials handling Machine ren t Total relevant costs under make alternative $82,000 $40,000 20,000 15,000 2,000 3,000 $80,000 The allocated fixed plant administration, taxes, and insurance will not change if Ace makes or buys the chains. Hence, these costs are irrelevant to the make-or-buy decision. The analysis indicates that Ace should not buy the chains from the outside supplier. 2. Relevant costs under the make alternative: Relevant costs (as computed in requirement 1) Relevant costs under the buy alternative: Costs of purchases (10,000 ? $8. 0) Additional fixed costs Additional contribution margin from using the space where the chains were made to upgrade the bicycles by adding mud flaps and reflector bars, 10,000 ? ($20 ââ¬â $18) Total relevant costs under the buy alternative $80,000 $82,000 16,000 (20,000) $78,000 Ace should now buy the chains from an outside vendor and use its own capacity to upgrade its own bicycles. 3. In this requirement, the decision on mud flaps and reflectors is irrelevant to t he analysis. Cost of manufacturing chains: Variable costs, ($4 + $2 + $1. 50 = $7. 50) ? 6,200 Batch costs, $200/batcha ? 8 batches Machine rent Cost of buying chains, $8. 20 ? 6,200 a $46,500 1,600 3,000 $51,100 $50,840 $2,000 ? 10 batches In this case, Ace should buy the chains from the outside vendor. 11-28 11-37 (60 min. Multiple choice; comprehensive problem on relevant costs. You may wish to assign only some of the parts. Per Unit Fixed Manufacturing costs: Direct materials Direct manufacturing labor Variable manufac. indirect costs Fixed manufac. indirect costs Marketing costs: Variable Fixed Total $1. 00 1. 20 0. 80 0. 50 $1. 50 0. 90 Variable $3. 50 $0. 50 $3. 00 2. 40 $5. 90 0. 90 $1. 40 1. 50 $4. 50 1. (b) $3. 50 Manufacturing Costs Variable $3. 00 Fixed 0. 50 Total $3. 50 2. (e) None of the above. Decrease in operating income is $16,800. Differential $1,440,000+ $ 91,200* 720,000 + 360,000 + 1,080,000+ 360,000 ââ¬â 120,000 216,000 336,000 $ 24,000 New Old Revenues 24 0,000 ? $6. 0 Variable costs Manufacturing 240,000 ? $3. 00 Marketing and other 240,000 ? $1. 50 Variable product costs Contribution margin Fixed costs: Manufacturing $0. 50 ? 20,000 ? 12 mos. = Marketing and other $0. 90 ? 240,000 Fixed product costs Operating income *Incremental revenue: $5. 80 ? 24,000 Deduct price reduction $0. 20 ? 240,000 264,000 ? $5. 80 792,000 396,000 1,188,000 343,200 120,000 216,000 $ 7,200 72,000264,000 ? $3. 00 36,000264,000 ? $1. 50 108,000 16,800 ââ¬âââ¬â ââ¬âââ¬â ââ¬âââ¬â ââ¬â $ 16,800 3 $139,200 48,000 $ 91,200 3. (c) $3,500 If this order were not landed, fixed manufacturing overhead would be underallocated by $2,500, $0. 50 per unit ? 5,000 units.Therefore, taking the order increases operating income by $1,000 plus $2,500, or $3,500. 11-29 11-37 (Contââ¬â¢d. ) Another way to present the same idea follows: Revenues will increase by (5,000 ? $3. 50 = $17,500) + $1,000 Costs will increase by 5,000 ? $3. 00 Fixed overhead will not change Change in operating income $18,500 15,000 ââ¬â $ 3,500 Note that this answer to (3) assumes that variable marketing costs are not influenced by this contract. These 5,000 units do not displace any regular sales. 4. (a) $4,000 less ($7,500 ââ¬â $3,500) Government Contract As above $3,500 Regular Channels Sales, 5,000 ? $6. 00 Increase in costs: Variable costs only: Manufacturing, 5,000 ? $3. 0 $15,000 Marketing, 5,000 ? $1. 50 7,500 Fixed costs are not affected Change in operating income 5. (b) $4. 15 $30,000 22,500 $ 7,500 Differential costs: Variable: Manufacturing Shipping Fixed: $4,000 ? 10,000 $3. 00 0. 75 $3. 75 ? 10,000 0. 40 ? 10,000 4,000 $4. 15 ? 10,000 $41,500 $37,500 Selling price to break even is $4. 15 per unit. 6. (e) $1. 50, the variable marketing costs. The other costs are past costs, and are, therefore, irrelevant. None of these. The correct answer is $3. 55. This part always gives students trouble. The short-cut solution below is followed b y a longer solution that is helpful to students. 7. (e) 11-30 11-37 (Contââ¬â¢d. Short-cut solution: The highest price to be paid would be measured by those costs that could be avoided by halting production and subcontracting: Variable manufacturing costs Fixed manufacturing costs saved $60,000 ? 240,000 Marketing costs (0. 20 ? $1. 50) Total costs Longer but clearer solution: Comparative Annual Income Statement Present Difference Proposed Revenues Variable costs: Manufacturing, 240,000 ? 3. 00 Marketing and other, 240,000 ? $1. 50 Variable costs Contribution margin Fixed costs: Manufacturing Marketing and other Total fixed costs Operating income $1,440,000 720,000 360,000 1,080,000 360,000 120,000 216,000 336,000 $ 24,000 $ ââ¬â +132,000 ââ¬â 72,000 $1,440,000 852,000* 288,000 1,140,000 300,000 60,000 216,000 276,000 $ 24,000 $3. 00 0. 25 0. 30 $3. 55 ââ¬â 60,000 $ 0 This solution is obtained by filling in the above schedule with all the known figures and working â⠬Å"from the bottom upâ⬠and ââ¬Å"from the top downâ⬠to the unknown purchase figure. Maximum variable costs that can be incurred, $1,140,000 ââ¬â $288,000 = maximum purchase costs, or $852,000. Divide $852,000 by 240,000 units, which yields a maximum purchase price of $3. 55. 11-31 11-38 (15 min. ) Make or buy (continuation of 11-37). The maximum price Class Company should be willing to pay is $3. 9417 per unit. Expected unit production and sales of new product must be half of the old product (1/2 ? 240,000 = 120,000) because the fixed manufacturing overhead rate for the new product is twice that of the fixed manufacturing overhead rate for the old product.Proposed Make New Old Present Product Product Total Revenues $1,440,000 $1,080,000 $1,440,000 $2,520,000 Variable (or purchase) costs: Manufacturing 720,000 600,000 946,000* 1,546,000 Marketing and other 360,000 240,000 288,000 528,000 Total variable costs 1,080,000 840,000 1,234,000 2,074,000 Contribution margin 360,000 240,000 206,000 446,000 Fixed costs: Manufacturing 120,000 120,000 120,000 Marketing and other 216,000 60,000 216,000 276,000 Total fixed costs 336,000 180,000 216,000 396,000 Operating income $ 24,000 $ 60,000 $ (10,000) $ 50,000 *This is an example of opportunity costs, whereby subcontracting at a price well above the $3. 50 current manufacturing (absorption) cost is still desirable because the old product will be displaced in manufacturing by a new product that is more profitable.Because the new product promises an operating income of $60,000 (ignoring the irrelevant problems of how fixed marketing costs may be newly reallocated between products), the old product can sustain up to a $10,000 loss and still help accomplish management's overall objectives. Maximum costs that can be incurred on the old product are $1,440,000 plus the $10,000 loss, or $1,450,000. Maximum purchase cost: $1,450,000 ââ¬â ($288,000 + $216,000) = $946,000. Maximum purchase cost per unit: $946,0 00 ? 240,000 units = $3. 9417 per unit. Alternative Computation Operating income is $9. 00 ââ¬â $8. 50 = $0. 50 per unit for 120,000 new units Target operating income Maximum loss allowed on old product Maximum loss per unit allowed on old product, $10,000 ? 40,000 = Selling price of old product Allowance for loss Total costs allowed per unit Continuing costs for old product other than purchase cost: Fixed manufacturing costsââ¬âââ¬âall transferred to new product Variable marketing costs Fixed marketing costs Maximum purchase cost per unit $60,000 50,000 $10,000 $0. 0417 $6. 0000 0. 0417 6. 0417 $ ââ¬â 1. 20 0. 90 2. 1000 $3. 9417 11-32 11-39 (30 min. ) Appendix). 1. Optimal production plan, computer manufacturer (Chapter X = Units of printers Y = Units of desktop computers Objective: Maximize total contribution margin of $200X + $100Y Constraints: For production line 1: 6X + 4Y ? 24 For production line 2: 10X ? 0 Sales of X and Y: X ââ¬â Y ? 0 Negative productio n impossible: X 0 ? Y ? 0 2. Solution Exhibit 11-39 presents a graphical summary of the relationships. The sales-mix constraint here is somewhat unusual. The X ââ¬â Y ? 0 line is the one going upward at a 45-degree angle from the origin. The optimal corner is the point (2, 3), 2 printers and 3 computers. The corner point where the production line 1 and production line 2 constraints meet is X = 2, Y = 3 that can be calculated by solving: 6X + 4Y = 24 (1) Production line 1 constraint 10X = 20 (2) Production line 2 constraint From (2) X = 20 ? 10 = 2 Substituting for X in (1) 6 ? 2 + 4Y = 24 4Y = 24 ââ¬â 12 = 12 Y = 12 ? = 3 The corner point where the production line 2 constraint and the product-mix constraint meet is X = 2, Y = 2 that can be calculated by solving: 10X = 20 (2) Production line 2 constraint X ââ¬â Y = 0 (3) Product-mix constraint From (2) X = 20 ? 10 = 2 Substituting for X in (3) Y = 2 Using the trial-and-error method: Trial 1 2 3 4 Corner (X; Y) (0; 0) (2; 2) (2; 3) (0; 6) Total Contribution Margin $ 200(0) + $100(0) = $ 0 200(2) + 100(2) = 600 200(2) + 100(3) = 700 200(0) + 100(6) = 600 The optimal solution that maximizes operating income is 2 printers and 3 computers. 11-33 11-39 (Contââ¬â¢d. ) SOLUTION EXHIBIT 11-39 Graphic Solution to Find Optimal Mix, Information Technology, Inc. Product Line 1 Constraint Product Y Production in Units 6 Product Line 2
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment